Whitford coatings suited for reprographic applications.
| Fuser roller topcoat. |
XLR 17-353 |
PTFE-conductive topcoat for reprographic fuser roller. |
| Anti-static coating for copier rollers. |
1781 |
PTFE-conductive basecoat for reprographic fuser roller. |
| Anti-static coating for copier rollers. |
1782 |
PTFE-conductive midcoat for reprographic fuser roller. |
| Anti-static coating for copier rollers. |
1783 |
PTFE-conductive topcoat for reprographic fuser roller. |
| A conductive basecoat providing excellent adhesion. |
4060 |
PFA-conductive basecoat for reprographic fuser roller. |
| Extreme release high-temperature applications. |
1700 |
Xylan 1700 series is recommended for "extreme use" applications which require excellent nonstick or chemical resistance. This series uses PFA as the fluoropolymer. A variety of basecoats may be used with the PFA topcoat; or a 1700 PFA basecoat is also suitable. |
| Can be used with the 75-4018 basecoat to accomplish high builds of 70-90 microns. |
75-4001-1 |
This basecoat was designed to be applied over a gritblast or alkali-etched aluminum substrate. |
| Can be used with the 75-4018 basecoat to accomplish high builds of 70-90 microns. |
75-4002-1 |
Reinforced midcoat, part of a 3-coat high durability system. |
| Can be used with the 75-4018 basecoat to accomplish high builds of 70-90 microns. |
75-4003-1 |
High release topcoat designed to give excellent release to a 3-coat reinforced coating. |
| Designed for copier rollers — providing an adhesion layer for a PFA sleeve. |
75-4022-1 |
The basecoat is applied to a copier roller and dried; then a PFA sleeve is applied. This is then shrunk onto the basecoat at a temperature of approximately 600°F. |
| For the inside of copier rollers. |
I-10008-3 |
A matte coating that absorbs IR from the halogen heat source and heats the roller to fuse the ink. |
| For the inside of copier rollers. |
90-2002B-2 |
A matte coating that absorbs IR from the halogen heat source and heats the roller to fuse the ink. |
| To be applied on a paper transfer roller on a copier machine. |
I-10408B |
A water-based one coat system designed to give high-friction properties needed to remove paper from a copier machine. |
| Topcoat with a liquid basecoat for high speed fuser rolls. |
80-511 PFA |
The basecoat is applied and the powder topcoat is applied in multiple passes to achieve the desired DFT. |
| Topcoat with a liquid basecoat for high speed fuser rolls. |
80-510 PFA+ |
The basecoat is applied and dried. The powder topcoat is then applied in multiple passes to achieve the DFT. |
| Standard basecoat for use on high speed copier rollers. |
75-4018-1 |
Basecoat that has a high level of reinforcement that gives enhanced life of the roller. |
| Designed for the latest generation of fusing belts, made from for instance, smooth stainless steel. |
75-1044-1 |
Will adhere to smooth (no grit-blast) fusing belts, topcoated with either 2 or 3 layers. Will give excellent service-life. |
| Basecoat for PFA powders used for high speed fuser rolls. |
80-087 |
Black waterborne basecoat for PFA powder topcoats. |
