Whitford coatings suited for fastener and dry-film lubrication applications.
Any mating surfaces that need dry lubrication in high speed and/or low pressure environments such as rotary actuators, carburetors, bearings, seat belt clips, garden tools, and actuators. |
1010 |
Resin-bonded, thermosetting, PTFE based, dry-film lubricant / easy-clean coating designed for conventional spray techniques. It is used to reduce friction, prevent scoring and galling, or provide secondary lubrication in the event of failure of the primary (conventional) lubricant. |
| Applications to prevent wear of mating surfaces under extreme loads such as bearings, sealing rings, and valve springs. |
1052 |
Resin-bonded, thermosetting, dry-film lubricant designed for conventional spray techniques. It is formulated for high-pressure, low-speed wear applications and provides long-term lubrication for bearing surfaces subjected to extreme pressures, up to 150,000 psi (10,500 kg/cm2). The coating utilizes a unique dual lubrication system of PTFE and MoS2 and is superior to “moly” greases which wash away and PTFE coatings which “cold flow.” Resin-bonded lubricants in Xylan 1052 stay on the job, even in harsh chemical environments. |
| Use for anti-galling of titanium valve parts or connectors. |
1053 |
PTFE MoS2 blend. |
| Dry film lubrication over a wide range of pressures and speeds; air conditioner compressor swash plates. |
1054 |
Resin-bonded, thermosetting, dry-film lubricant designed for conventional spray techniques. It utilizes PTFE, MoS2 and graphite as the lubricants. Designed for long-term lubrication and wear applications over broad conditions of pressure and speed. |
| Applications demanding high lubrication and heavy wear, i.e., lab equipment. |
1088 |
As 1010 but with internal reinforcement to give longer life performance and improved wear resistance. |
| Dry film lubricant for chemical processing equipment. |
1331 |
This resin-bonded coating which is virtually unaffected by any solvent to 205°C [400°F] contains a high percentage of PTFE and is recommended for use when a highly lubricious nonstick surface is desired. It is intended for application by conventional spray techniques. |
| Any mating surfaces that need dry lubrication; rotary actuators; carburetors; bearings; seat belt clips; actuators. |
1421 |
This VOC compliant, resin-bonded, PTFE based coating may be used on any component to reduce friction, prevent scoring and galling, or provide secondary lubrication in the event of failure of the primary (conventional) lubricant. This coating also provides a degree of chemical resistance. It is intended for application by conventional spray techniques. Note: VOC compliance applies to USA only |
| Any mating surface which requires lubrication; hinge pins; piston casings; compressors; threaded fasteners. |
1424 |
This VOC compliant, resin-bonded, PTFE based coating is primarily formulated for use on fasteners to prevent corrosion and facilitate make-up torque. It is intended for application by conventional spray techniques. Note: VOC compliance applies to USA only. |
| Extreme pressure, low speed applications; blow out preventors. |
1425 |
A VOC-compliant coating, which is designed for application by conventional spray techniques, providing long-term lubrication for bearing surfaces subjected to extreme pressures: up to 150,000 psi (10,500 kg/cm2). The coating uses a unique dual lubrication system of PTFE and MoS2. Superior to “moly” greases which wash away and PTFE coatings which may have the potential to “cold flow”, resin-bonded lubricants in Xylan 1425 stay on the job, even in harsh chemical environments. Note: VOC compliance applies to USA only |
| Threaded fasteners; dip spin parts; small components; screws. |
5110 |
Resin-bonded, thermosetting, PTFE based, dry-film lubricant coating designed for a dip spin technique. It is used to reduce friction. |
| Food chutes; sweet molds; circular knife blades. |
8110 |
Resin-bonded, thermosetting, dry-film lubricant / easy-clean coating designed for conventional spray techniques. |
| Threaded fasteners; dip spin parts, small components; screws. |
5110 |
Internally reinforced with titanium for improved wear / abrasion resistance, two-coat, high cure, PTFE based, nonstick, coating system designed for a coil coating application technique. |
| Threaded fasteners; wood screws. |
5164 |
This resin bonded, lubricious, coating is designed to be applied by a dip spin technique. |
| Threaded fasteners, particularly for the automotive industry. |
5230 |
This resin bonded, coating which is intended to be applied by a dip spin technique is designed to protect small fasteners from corrosion caused by road salt, acid rain and other forms of environmental corrosion. It offers controlled torque tension coupled with excellent corrosion resistance. |
| Threaded fasteners for the building industries, including the roofing and appliance industries; fasteners; stampings; end caps; screws. |
5250 |
This resin bonded coating, designed for application by a dip spin technique, has a low level of PTFE to facilitate driving through metal without encouraging backout. Lots of colors available. |
| Threaded fasteners for the building industries, including the roofing and appliance industries; fasteners; stampings; end caps; screws. |
5270 |
This resin bonded coating, designed for application by a dip spin technique, has a low level of PTFE to facilitate driving through metal without encouraging backout. Lots of colors available. |
| Threaded fasteners for the building industries, including the roofing and appliance industries; fasteners; stampings; end caps; screws. |
5420 |
This resin bonded coating, designed for application by a dip spin technique, has a low level of PTFE to facilitate driving through metal without encouraging backout. Xylan 5420 is a VOC compliant product and is intended to offer an environmentally acceptable alternative to the solventborne materials. |
| Threaded fasteners for the building and appliance industries; fasteners; stampings; end caps; screws. |
5430 |
Xylan 5430 is a protective coating for small fasteners and hardware. It is a VOC compliant coating that provides good corrosion and UV protection. |
| Threaded fasteners for the building, roofing or appliance industries where acid rain resistance is required; stampings; end caps; screws; roofing fasteners; transmission shafts. |
5611 |
A zinc rich primer formulated for application using a dip-spin application technique. It enhances the Corrosion resistant provided by Xylan topcoats as measured in the Kesternich test DIN 50018 acid rain test. |
