Quantum^®350

Overview

Quantum350 is a remarkable one-coat that provides outstanding release and cures at 350°C/660°F. It’s perfect for cast aluminum pieces, used in small electrics, as casting blisters are avoided at this lower cure temperature.

The benefits of a two-coat in one-coat (and then some)

1. Reduces warping: Castings such as griddles often warp when cured at 400°C/750°F. Quantum350’s lower cure avoids most of this risk.
2. Saves energy and money: Running the cure ovens at 350°C is far more energy-efficient than running them at 400-430°C. Reducing the number of rejected pieces cuts the cost of remelting. It also avoids the cost of creating new castings to replace the rejects (which then have to be coated again).
3. The release of a two-coat: Quantum350’s unique formula gives all the release of a two-coat nonstick in one economical coat, something that was impossible until now.
4. Outstanding corrosion resistance: Passes immersion in 10% saltwater for 120 hours with no blisters, no visible changes.
5. Brighter sparkle: Quantum350’s unique one-coat formula permits the metallic effect in the black coating to have all the sparkle of a two-coat, which increases eye appeal at POS.
6. User-friendly: Quantum350 requires only a light gritblast (most conventional coatings require a heavy gritblast) or an etch prior to coating, making it easier (and more economical) to use. It is also more easily recoated than conventional nonsticks.